Product image · configuration may vary
LRS180 Series CNC Linear Guideway Slide Table
LRS180 CNC linear guideway slide table. Compare catalog configurations, travel and weight, then confirm load, drive and mounting requirements.
Final specifications depend on the workpiece, tooling, cutting load, duty cycle, motor and machine interface.
LRS180 · CNC linear-guideway slide table
Five compact linear-slide configurations for modular machine integration.
LRS180 provides linear-guideway motion in a compact platform for drilling, milling, positioning and automated feed modules. Select the table length and travel from the published family, then confirm load, accuracy, drive, lubrication and mounting details against the approved drawing.
Application fit
Where the LRS180 platform fits.
The final machine design should be based on cutting load and integration requirements, not the model name alone.
Compact linear feed modules
Linear positioning for special-purpose machines where the installation envelope is limited.
Drilling and milling stations
Workpiece or tooling feed for defined drilling, light milling and multi-operation cycles.
Automated fixtures
Repeatable positioning modules integrated with guarding, workholding, sensors and machine controls.
Published selection data
Model and travel matrix.
| LRS180×300-100 | Table reference A 200 mm · B/D 20 mm · C/C1 130 mm · E 300 mm · 6 × Ø12 mounting holes · stroke 100 (catalog value) · 20 kg reference weight |
|---|---|
| LRS180×360-160 | Table reference A 200 mm · B/D 25 mm · C/C1 155 mm · E 360 mm · 6 × Ø12 mounting holes · stroke 160 (catalog value) · 25 kg reference weight |
| LRS180×360-110 | Table reference A 250 mm · B/D 25 mm · C/C1 155 mm · E 360 mm · 6 × Ø12 mounting holes · stroke 110 (catalog value) · 25 kg reference weight |
| LRS180×420-220 | Table reference A 200 mm · B/D 30 mm · C/C1 180 mm · E 420 mm · 6 × Ø12 mounting holes · stroke 220 (catalog value) · 30 kg reference weight |
| LRS180×420-170 | Table reference A 250 mm · B/D 30 mm · C/C1 180 mm · E 420 mm · 6 × Ø12 mounting holes · stroke 170 (catalog value) · 30 kg reference weight |
| Drive reference | Published family sheet lists a Ø20 × 4 ball screw and Ø15 mm shaft-diameter reference. Confirm the exact drive build and support arrangement on the selected model drawing. |
Source: JNYO product catalog, printed page 66 (PDF page 36), Chinese edition, approximately 74 MB. The stroke column does not print a separate unit; values are reproduced as shown. Confirm units and the complete dimensions on the configuration drawing.
Dimensions and weights above were transcribed from the existing JNYO source sheet. They are selection references, not acceptance data. Confirm every dimension, tolerance, load, accuracy value and supply scope in the approved drawing and quotation.
Engineering workflow
From application data to an approved slide-table build.
Define the process
Share the operation, cutting direction, workpiece and fixture.
Calculate the load
Provide mass, force, moment, speed, acceleration and duty cycle.
Check the envelope
Confirm travel, center height, mounting faces, covers and service access.
Approve the drawing
Release the final dimensions, drive, accuracy and acceptance method before ordering.
Engineering files
Request the matching STEP reference for the selected configuration.
Configuration references include LRS180×300-100, LRS180×360-110, LRS180×360-160, LRS180×420-170 and LRS180×420-220. Request the matching file after the required travel and table layout are confirmed.
Can the downloaded STEP file be used as the final manufacturing drawing?
No. Use it for envelope and interference checks. The approved dimensional drawing, configuration list and quotation remain the final commercial and engineering reference.
Which data is still configuration dependent?
Load, accuracy, speed, acceleration, motor, lubrication, covers, limit sensing, screw support and mounting details must be confirmed for the selected build.
Move from product review to machine integration.
Use the model as a starting point. The approved dimensional drawing and configuration record remain the final integration reference.
Confirm mounting faces, center height, spindle interface and machine envelope.
Send application brief → 023D libraryFind 3D model & CAD filesSearch the engineering-file library or request the model for the selected configuration.
Search files → 03Selection reviewCheck the application with JNYOShare the workpiece, tooling, speed, load, accuracy and motor preferences.
Request engineering review ↗
LRS360 Series CNC Linear Guideway Slide Table
LRS360 CNC linear guideway slide table. Compare catalog configurations, travel and weight, then confirm load, drive and mounting requirements.
LRS220 Series CNC Linear Guideway Slide Table
LRS220 CNC linear guideway slide table. Compare catalog configurations, travel and weight, then confirm load, drive and mounting requirements.
LRS250 Series CNC Linear Guideway Slide Table
LRS250 CNC linear guideway slide table. Compare catalog configurations, travel and weight, then confirm load, drive and mounting requirements.
Send the travel, load and mounting envelope before choosing LRS180.
JNYO will compare the five published configurations and confirm the appropriate drawing and integration details.