Product image · configuration may vary
CRS300 CNC Cross Linear Guideway Slide Table
CRS300 cnc cross linear guideway slide table. Compare 12 catalog configurations and reference weights, then confirm travel, load, mounting and drive requirements.
Final specifications depend on the workpiece, tooling, cutting load, duty cycle, motor and machine interface.
CRS300 CNC Cross Linear Guideway Slide Table
CRS300 is a JNYO two-axis cross-slide. The catalog lists 12 configurations below. Select the complete configuration using travel, mounting geometry, workpiece and fixture mass, cutting forces and acceptance requirements.
Catalog configurations
Source: JNYO product catalog, printed page 73 (PDF page 40), Chinese edition, approximately 74 MB.
Lower and upper refer to the two stacked slides in the drawing, not downward and upward motion. Match both travel values to the installation layout. Stroke values are reproduced as printed; the source stroke columns do not separately state a unit. Confirm units on the complete drawing. Weight is product reference weight, not permitted payload or cutting-load capacity.
| Catalog model | Lower slide stroke | Upper slide stroke | Weight (kg) |
|---|---|---|---|
| CRS30-1212 | 120 | 120 | 145 |
| CRS30-2612 | 260 | 120 | 160 |
| CRS30-3712 | 370 | 120 | 170 |
| CRS30-5012 | 500 | 120 | 190 |
| CRS30-6412 | 640 | 120 | 200 |
| CRS30-9012 | 900 | 120 | 230 |
| CRS30-1226 | 120 | 260 | 160 |
| CRS30-2626 | 260 | 260 | 175 |
| CRS30-3726 | 370 | 260 | 190 |
| CRS30-5026 | 500 | 260 | 200 |
| CRS30-6426 | 640 | 260 | 215 |
| CRS30-9026 | 900 | 260 | 245 |
Structure and integration references
The catalog describes alternative handed installation arrangements and notes that guideway covers and servo motors can be configured according to requirements. Confirm the selected orientation, both drive interfaces and the mounting faces before integration.
Selection and acceptance inputs
- Required travel for each moving axis, installation orientation and the complete mounting/interface drawing.
- Workpiece, fixture and moving-tool mass, center of gravity, cutting forces and overturning moments.
- Feed speed, acceleration, operating frequency, lubrication and protection environment.
- Positioning and repeatability targets, test method, motor and control interfaces.
- Associated machining units, quantity and requested delivery date.
The cited model pages do not assign housing material grades or define a universal positioning accuracy, payload or machining capability. Specify material, guideway and screw requirements, lubrication, protection, load cases and acceptance conditions in the technical agreement.
Configuration questions
Can the product weight be treated as a payload rating?
No. The listed weight describes the product reference configuration. Loads and moments require a separate check against the complete machine arrangement.
Can a catalog picture be used as the final installation drawing?
No. Use it to identify the model and prepare the application brief. Confirm the dimensional drawing, interface details and acceptance conditions before ordering or manufacturing mating parts.
Request matching dimensional drawings and compatible 3D references for the selected configuration. Availability, price, delivery time and installation or after-sales service scope must be confirmed for the order.
Five items needed before configuration approval.
Providing these details early reduces drawing revisions and makes the quotation technically useful.
Operation
Boring, milling, drilling, facing or a combined process.
Workpiece
Material, feature dimensions, tolerance and target cycle time.
Tooling
Holder, tool diameter, interface, speed and coolant requirement.
Performance
Cutting load, finish, runout, duty cycle and service life.
Integration
Mounting drawing, center height, envelope, orientation and control.
Move from product review to machine integration.
Use the model as a starting point. The approved dimensional drawing and configuration record remain the final integration reference.
Confirm mounting faces, center height, spindle interface and machine envelope.
Send application brief → 023D libraryFind 3D model & CAD filesSearch the engineering-file library or request the model for the selected configuration.
Search files → 03Selection reviewCheck the application with JNYOShare the workpiece, tooling, speed, load, accuracy and motor preferences.
Request engineering review ↗
CRS360 CNC Cross Linear Guideway Slide Table
CRS360 cnc cross linear guideway slide table. Compare 20 catalog configurations and reference weights, then confirm travel, load, mounting and drive requirements.
CRS500 CNC Cross Linear Guideway Slide Table
CRS500 cnc cross linear guideway slide table. Compare 2 catalog configurations and reference weights, then confirm travel, load, mounting and drive requirements.
CRS220 CNC Cross Linear Guideway Slide Table
CRS220 cnc cross linear guideway slide table. Compare 8 catalog configurations and reference weights, then confirm travel, load, mounting and drive requirements.
Confirm the drawing before ordering.
Send the process, workpiece, tooling and machine interface for engineering review.