XT20 Series Boring & Milling Power Head
Interface reference: ER25 / MT2
JNYO CNC
Product Finder and Comparison
Compare JNYO spindle power heads, CNC slide tables and machine leveling pads by model, product family and spindle interface. Review published configuration references side by side, then open the full product details…
Compare JNYO spindle power heads, CNC slide tables and machine leveling pads by model, product family and spindle interface. Review published configuration references side by side, then open the full product details and drawings to confirm the application, installation conditions, tooling, drive and acceptance requirements for your machine.
Find and compare product models
Search spindle power heads, CNC slide tables and machine leveling pads. Select up to 3 models to compare published references before reviewing the exact configuration.
Product reference comparison
Speeds can depend on bearings and configuration. Product weight is not payload capacity. Confirm units, complete drawings and application requirements before selection. On small screens, scroll the table sideways.
No matching models. Try a shorter model name or reset the family and interface filters.
XT20-MB Rear-Mounted Boring & Milling Spindle Unit
Interface reference: ER25 / MT2
XT20-MF Front-Mounted Boring & Milling Spindle Unit
Interface reference: ER25 / MT2
XT30-2 Series Boring & Milling Power Head
Interface reference: ER32 / MT3 / NT30
XT30-2 Boring & Milling Spindle Unit with Motor (Rear-Mounted)
Interface reference: ER32 / MT3 / NT30
XT30-2 Boring & Milling Spindle Unit with Motor (Front-Mounted)
Interface reference: ER32 / MT3 / NT30
ZG30-2 Slide-Feed Drilling & Tapping Power Head
Interface reference: B18 / ER25
XT30-1 Series Boring & Milling Power Head
Interface reference: ER32 / MT3 / NT30
XT30-1 Boring & Milling Spindle Unit with Motor (Rear-Mounted)
Interface reference: ER32 / MT3 / NT30
XT30-1 Boring & Milling Spindle Unit with Motor (Front-Mounted)
Interface reference: ER32 / MT3 / NT30
XT40-1 Series Boring & Milling Power Head
Interface reference: ER40 / MT4 / NT40
XT40-1 Boring & Milling Spindle Unit with Motor (Rear-Mounted)
Interface reference: ER40 / MT4 / NT40
XT40-1 Boring & Milling Spindle Unit with Motor (Front-Mounted)
Interface reference: ER40 / MT4 / NT40
XT40-2 Series Boring & Milling Power Head
Interface reference: ER40 / MT4 / NT40
XT40-2 Boring & Milling Spindle Unit with Motor (Rear-Mounted)
Interface reference: ER40 / MT4 / NT40
XT40-2 Boring & Milling Spindle Unit with Motor (Front-Mounted)
Interface reference: ER40 / MT4 / NT40
XT40-1-E Series Enhanced Boring & Milling Spindle Head
Interface reference: BT40 / NT40
XT40-1-E-MB Enhanced Spindle Head (Rear-Mounted)
Interface reference: BT40 / NT40
XT40-1-E-MF Enhanced Spindle Head (Front-Mounted)
Interface reference: BT40 / NT40
XT40-2-E Series Enhanced Boring & Milling Spindle Head
Interface reference: BT40 / NT40
XT40-1-E BT40 Motorized Spindle Head with ATC (Rear-Mounted)
Interface reference: BT40
XT40-1-E BT40 Motorized Spindle Head with ATC and Through-Spindle Coolant
Interface reference: BT40
XT40-2-E-MB Enhanced Spindle Head (Rear-Mounted)
Interface reference: BT40 / NT40
XT40-2-E-MF Enhanced Spindle Head (Front-Mounted)
Interface reference: BT40 / NT40
XT40-2-E BT40 Motorized Spindle Head with ATC (Rear-Mounted)
Interface reference: BT40
XT40-2-E BT40 Motorized Spindle Head with ATC and Through-Spindle Coolant
Interface reference: BT40
XT45-1 Boring & Milling Power Head
Interface reference: NT40
XT45-1 Rear-Mounted Motor Spindle Unit
Interface reference: NT40
XT45-1 BT40 ATC Spindle Head
Interface reference: BT40
XT45-1 Front-Mounted Motor Spindle Unit
Interface reference: NT40
XT45-1 BT40 ATC + CTS Spindle Head
Interface reference: BT40
XT45-1 BT40 Rear Motorized Spindle
Interface reference: BT40
XT45-2 Boring & Milling Power Head
Interface reference: NT40
XT45-2 Rear-Mounted Motor Spindle Unit
Interface reference: NT40
XT45-2 Front-Mounted Motor Spindle Unit
Interface reference: NT40
XT45-2 BT40 ATC Spindle Head
Interface reference: BT40
XT45-2 BT40 ATC + CTS Spindle Head
Interface reference: BT40
XT45-2 BT40 Rear Motorized Spindle
Interface reference: BT40
XT50-1 Boring & Milling Power Head
Interface reference: BT50 / NT50
XT50-1 Rear-Mounted Motor Spindle Unit
Interface reference: NT50
XT50-1 Front-Mounted Motor Spindle Unit
Interface reference: NT50
XT50-1 BT50 ATC Spindle Head
Interface reference: BT50
XT50-1 BT50 ATC + CTS Spindle Head
Interface reference: BT50
XT50-1 BT50 Rear Motorized Spindle
Interface reference: BT50
XT50-2 Boring & Milling Power Head
Interface reference: BT50 / NT50
XT50-2 Rear-Mounted Motor Spindle Unit
Interface reference: NT50
XT50-2 Front-Mounted Motor Spindle Unit
Interface reference: NT50
XT50-2 BT50 ATC Spindle Head
Interface reference: BT50
XT50-2 BT50 ATC + CTS Spindle Head
Interface reference: BT50
XT50-2 BT50 Rear Motorized Spindle
Interface reference: BT50
XT60-1 Boring & Milling Power Head
Interface reference: BT50 / NT50
XT60-1 Rear-Mounted Motor Spindle Unit
Interface reference: NT50
XT60-1 Front-Mounted Motor Spindle Unit
Interface reference: NT50
XT60-1 BT50 ATC Spindle Head
Interface reference: BT50
XT60-1 BT50 ATC + CTS Spindle Head
Interface reference: BT50
XT60-2 Boring & Milling Power Head
Interface reference: BT50 / NT50
XT60-2 Rear-Mounted Motor Spindle Unit
Interface reference: NT50
XT60-2 Front-Mounted Motor Spindle Unit
Interface reference: NT50
XT60-2 BT50 ATC Spindle Head
Interface reference: BT50
XT60-2 BT50 ATC + CTS Spindle Head
Interface reference: BT50
XT70-1 & XT70-2 Series Boring & Milling Power Head
Interface reference: FB120
SD120 Sleeve-Feed Power Head Series
Interface reference: BT40 / NT40
XT40-1 Servo Facing Head
Interface reference: BT40
XT45-1 Servo Facing Head
Interface reference: BT40
XT50-1 Servo Facing Head
Interface reference: BT50
XT60-1 Servo Facing Head
Interface reference: BT50
LRS180 Series CNC Linear Guideway Slide Table
5 catalog configurations · see travel and weight references
LRS220 Series CNC Linear Guideway Slide Table
7 catalog configurations · see travel and weight references
LRS250 Series CNC Linear Guideway Slide Table
11 catalog configurations · see travel and weight references
LRS300 Series CNC Linear Guideway Slide Table
11 catalog configurations · see travel and weight references
LRS360 Series CNC Linear Guideway Slide Table
6 catalog configurations · see travel and weight references
LRS420 Series CNC Linear Guideway Slide Table
1 catalog configurations · see travel and weight references
LRS500 Series CNC Linear Guideway Slide Table
2 catalog configurations · see travel and weight references
URS220 Series CNC Hardened Guideway Slide Table
7 catalog configurations · see travel and weight references
URS250 Series CNC Hardened Guideway Slide Table
11 catalog configurations · see travel and weight references
URS300 Series CNC Hardened Guideway Slide Table
9 catalog configurations · see travel and weight references
URS360 Series CNC Hardened Guideway Slide Table
7 catalog configurations · see travel and weight references
URS420 Series CNC Hardened Guideway Slide Table
6 catalog configurations · see travel and weight references
URS500 Series CNC Hardened Guideway Slide Table
6 catalog configurations · see travel and weight references
URS630 Series CNC Hardened Guideway Slide Table
2 catalog configurations · see travel and weight references
CRS220 CNC Cross Linear Guideway Slide Table
8 catalog configurations · see travel and weight references
CRS300 CNC Cross Linear Guideway Slide Table
12 catalog configurations · see travel and weight references
CRS360 CNC Cross Linear Guideway Slide Table
20 catalog configurations · see travel and weight references
CRS500 CNC Cross Linear Guideway Slide Table
2 catalog configurations · see travel and weight references
VRS160 CNC Vertical Linear Guideway Slide Table
1 catalog configurations · see travel and weight references
VRS250 CNC Vertical Linear Guideway Slide Table
3 catalog configurations · see travel and weight references
VRS270 CNC Vertical Linear Guideway Slide Table
1 catalog configurations · see travel and weight references
VRS360 CNC Vertical Linear Guideway Slide Table
1 catalog configurations · see travel and weight references
VRS420 CNC Vertical Linear Guideway Slide Table
2 catalog configurations · see travel and weight references
WRS400 Horizontal Machining Center Vertical Linear Guideway Slide Table
1 catalog configurations · see travel and weight references
WRS500 Horizontal Machining Center Vertical Linear Guideway Slide Table
1 catalog configurations · see travel and weight references
BRS300 CNC Cross Hardened Guideway Slide Table
11 catalog configurations · see travel and weight references
BRS500 CNC Cross Hardened Guideway Slide Table
8 catalog configurations · see travel and weight references
DTT-M24 Machine Tool Leveling Pads
Interface reference: See configuration details
DTT-M30 Machine Tool Leveling Pads
Interface reference: See configuration details
Need help with a configuration? Send the workpiece, process, tooling and machine-interface requirements.