Product image · configuration may vary
DTT-M24 Machine Tool Leveling Pads
Final specifications depend on the workpiece, tooling, cutting load, duty cycle, motor and machine interface.
DTT-M24 leveling pad selection
DTT-M24 is a JNYO machine-support and leveling-pad model. Select it using the machine structure, support layout, actual load distribution, foundation and installation drawing.
Source drawing references
The values below preserve the fields and units in the original product image.
| Model | DTT-M24 |
|---|---|
| Table length | 197.5 mm |
| Table width | 140 mm |
| Table height | 66.5 mm |
| Adjustment thread shown | M16 |
| Parallelism notation | ≤0.05; unit and acceptance conditions are not specified separately |
| Adjustment range as printed | 66–72 mm |
| Single-piece weight | 9 kg |
| Single-pad load marking | 2 tonnes; load direction, dynamic/static conditions and test method require confirmation |
| Applicable anchor bolt shown | ≤24 mm |
| Angle shown | 5.6° |
The table width/height are 140 mm / 66.5 mm, while the drawing includes 139.5 mm / 66 mm. Confirm the datums and tolerances before installation.
The adjustment thread is M16; the anchor-bolt marking is ≤24 mm. The model suffix is not the adjustment-thread specification. Parallelism is not a stated leveling-resolution guarantee.
Load and installation conditions
The source marks 2 tonnes per pad but does not fully define load direction, dynamic/static conditions, eccentricity or test method. Do not multiply this marking by the number of support points to obtain an allowable machine weight, or select pads by dividing total machine weight by four.
Review the center of gravity, individual support loads, cutting and start-stop loads, floor condition, fixing method and machine-builder installation requirements. Anchoring and vibration control require application review.
Original parameter image and dimensions
Information for selection
- Machine mass and additional workpiece, fixture and service loads.
- Support positions, center of gravity, load direction and distribution.
- Operating conditions, required leveling range and acceptance method.
- Foundation, available space, fixing method and installation requirements.
Material grade, stock, delivery, warranty and supply scope require confirmation for the actual order.
Related products and support
Compare DTT-M30 · Find engineering files · Send installation requirements
Move from product review to machine integration.
Use the model as a starting point. The approved dimensional drawing and configuration record remain the final integration reference.
Confirm mounting faces, center height, spindle interface and machine envelope.
Send application brief → 023D libraryFind 3D model & CAD filesSearch the engineering-file library or request the model for the selected configuration.
Search files → 03Selection reviewCheck the application with JNYOShare the workpiece, tooling, speed, load, accuracy and motor preferences.
Request engineering review ↗
DTT-M30 Machine Tool Leveling Pads
DTT-M30 machine leveling pad with M20 adjustment thread shown in the source drawing. Review dimensions, support loads and installation conditions.
Confirm the drawing before ordering.
Send the process, workpiece, tooling and machine interface for engineering review.